Car film, a vital component in modern automotive aesthetics and protection, is produced through a complex process involving specialized Car cast film line. The specific equipment used can vary depending on the type of car film being produced, but the core processes often include:
Extrusion: This is the initial step where raw materials, such as polymers, are melted and forced through a die to create a continuous film shape.
Coating: Additional layers, like metal or ceramic, are applied to the film's surface to enhance its properties, such as heat rejection or UV protection.
Drying: The coated film is dried to solidify the applied layers.
Slitting: The film is cut into specific widths to match different car models and sizes.
Roll-to-Roll: The film is wound onto rolls for packaging and distribution.
For producing car film, especially the high-performance types, advanced machinery like cast film machines and stretching film machines are essential. These machines offer precise control over the film's thickness, uniformity, and overall quality.
What should be paid attention to when maintaining invisible car cover?
1. It is not recommended to drive on the highway within 3 days after the car cover is installed, because the car cover has not been fully attached and the edge is easy to blow away.
2. Similarly, you can wash the car normally after the construction, but do not use a high-pressure water gun to spray the car cover, which is also easy to blow away.
3. It is recommended to expose the car to the sun after the construction. The new car needs to remove the smell in the car compartment. At the same time, the moisture in the car cover needs a certain amount of time and conditions to evaporate and dry. Only in this way can the car cover fit perfectly with the car paint, and will not cause warping and voids after air enters. Note: Do not expose to the sun in high temperature weather, and rapid evaporation of moisture is easy to cause bubbles.
4. After the paint film is installed, it should be allowed to cure for more than 24 hours before cleaning or other similar operations. This process can completely cure the pressure-sensitive adhesive and completely evaporate all the moisture.
5. For the treatment of stubborn stains, you can use lacquer thinner or 99% high-concentration alcohol to scrub, which will not damage the paint protection film.
6. Under normal temperature, minor scratches will be automatically repaired within 20 to 30 minutes.
7. If it is exposed to rain, please clean it in time. Perform routine care on the film surface every two months and deep care on the film surface every six months.
8. Do not use solvent-based cleaners, insecticides and degreasers. It is strictly forbidden to polish or grind the paint protection film.
9. If there are insect corpses, gum or bird droppings on the surface of the paint protection film, please clean it in time. If it is not cleaned for a long time, it may leave corrosion or spots.
Your Partner in Car Film Production
If you're looking to establish a car film production line, we offer comprehensive solutions. Our team of experts will work closely with you to design and build a tailored machine production line that aligns with your specific goals.
From concept to commissioning, we provide end-to-end support, ensuring that your car film production process is efficient, reliable, and produces high-quality products.
Contact us today to discuss your car film production needs.